|
(Effective July 27, 2001) |
||
|
PART NUMBER |
DESCRIPTION |
PRICE |
|
HDx-BT |
For two-piece, wingrod, plug-in wings - basic kit with tin connectors and tin wipers (left & right printed circuit boards, male connectors, female housings, filter capacitors, mounting hardware and instructions). Includes shipping in the Continental U.S. |
$16.75 |
|
HDx-TP |
For two-piece, wingrod, plug-in wings - basic kit with tin connectors and pigtails (left & right printed circuit boards, male connectors, female housings, filter capacitors, mounting hardware and instructions). Includes shipping in the Continental U.S. |
$28.75 |
|
HDx-TW |
For two-piece, wingrod, plug-in wings - wired kit includes the basic kit with tin connectors and tin wipers plus pre-connected twisted triple pair wires (#24 gauge 48" for ailerons and 24" for flaps). Includes shipping in the Continental U.S. |
$21.50 |
|
HDx-TWP |
For two-piece, wingrod, plug-in wings - wired kit includes the basic kit with tin connectors and tin wipers plus pre-connected twisted triple pair wires and pigtails (#24 gauge 48" for ailerons and 24" for flaps). Includes shipping in the Continental U.S. |
$33.50 |
|
HDx-BG |
For two-piece, wingrod, plug-in wings - basic kit with gold pins and gold wipers. Includes shipping in the Continental U.S. |
$21.00 |
|
HDx-GP |
For two-piece, wingrod, plug-in wings - basic kit with gold pins and gold wipers and pigtails. Includes shipping in the Continental U.S. |
$33.00 |
|
HDx-GW |
For two-piece, wingrod, plug-in wings - wired kit includes the basic kit with gold connectors and gold wipers plus pre-connected twisted triple pair wires (#24 gauge 48" for ailerons and 24" for flaps). Includes shipping in the Continental U.S. |
$26.00 |
|
HDx-GWP |
For two-piece, wingrod, plug-in wings - wired kit includes the basic kit with gold connectors and gold wipers plus pre-connected twisted triple pair wires and pigtails (#24 gauge 48" for ailerons and 24" for flaps). Includes shipping in the Continental U.S. |
$38.00 |
|
RFC-1 |
RF (radio frequency) filter capacitors and heat shrink tubing for removing the "jitters" from aileron servos |
$1.50 |
|
WCP |
For two-piece, wingrod, plug-in wings - connector pin protector. Provides protection for male wing connectors (left & right side) pins during storage and transport. Includes shipping in the Continental U.S. |
$5.00 |
|
Note: For part numbers beginning with HD, the small “x” allows for one to specify which version of the printed circuit board mounting fixture that will be included. HD1 is the standard pcb, HD2 is a light version, and HD3 offers a strain relief for the receiver leads. If a number is not specified, then the standard version, HD1 will be supplied.
|
||
|
ITEM |
DESCRIPTION |
PRICE |
|
SM-1 |
For three-piece, saddle mounted wing, sized for Hera and Artemis sailplanes. – The harness consists of two halves, the fuselage half and the wing half. The wired kit includes 15” receiver/servo leads with gold plated connectors on the fuselage half. The wing half includes gold aileron connectors and tin flap connections. The wire inside the wing is #24 gauge in a twisted triple configuration. Includes shipping in the Continental U.S. |
$38.00 |
|
SM-1RF |
For three-piece, saddle mounted wing, sized for Hera and Artemis sailplanes. – The harness consists of two halves, the fuselage half and the wing half. The wired kit includes 15” receiver/servo leads with gold plated connectors on the fuselage half. The wing half includes gold aileron connectors and tin flap connections. The wire inside the wing is #24 gauge in a twisted triple configuration. RF attenuation components are included and pre-installed. Includes shipping in the Continental U.S. |
$42.00 |
|
EXT-1 |
Aileron extension lead. Consists of 12” leads with gold connectors on the common connection side and tin connectors on the servo side. Includes heatshrink tubing and shipping in the Continental U.S. |
$4.50 |
|
EXT-2 |
Aileron extension lead. Consists of 15” leads with gold connectors on the common connection side and tin connectors on the servo side. Includes heatshrink tubing and shipping in the Continental U.S. |
$4.50 |
|
EXT-1RF |
Aileron extension lead. Consists of 12” leads with gold connectors on the common connection side and tin connectors on the servo side and RF attenuation capacitors installed. Includes heatshrink tubing and shipping in the Continental U.S. |
$5.50 |
|
EXT-2RF |
Aileron extension lead. Consists of 15” leads with gold connectors on the common connection side and tin connectors on the servo side and RF attenuation capacitors installed. Includes heatshrink tubing and shipping in the Continental U.S. |
$5.50 |
|
SM-SP |
For three-piece, saddle mounted wing, custom sized. The harness consists of two halves, the fuselage half and the wing half. The wired kit includes the receiver/servo leads with gold plated connectors on the fuselage half. The wing half includes gold aileron connectors and tin flap connections. The wire inside the wing is #24 gauge in a twisted triple configuration. Includes shipping in the Continental U.S. |
Email for quote |
|
||